Increase your operational productivity and efficiency with advanced filling and marking equipment
Contact Our Sales Team
Whether you are a small start-up looking for entry-level equipment, or a high-volume corporation operating at even higher production speeds,
we can be your single source supplier of high-end filling and marking solutions. We will work with you to conceive and design your customized machinery,
match your requirements and constraints, and deliver high-speed performance across an expansive range of packaging applications.
Accessories
To complement your filling needs, Harpak-ULMA offers both product elevators and screw feeders to keep your hoppers full and running efficiently. For your liquids, we offer both heated and standard storage tanks.
Request a QuoteCLA Screw Feeder
VSA Storage Tanks
This doser is suitable for filling bread crumbs, any type of granular products and shredded and diced cheese:Â cheddar, mozzarella, parmesan.
FEATURES
- Product hopper complete with level probes.
- Product spreading paddle wheels.
- Product feed belt controlled by a photocell to maintain a continuous flow to the leveling wheel.
- Leveling wheel to control the amount of product on the dosing belt.
- Dosing belt independently driven.
- A photocell detecting the tray actuates this belt and a timer on the control panel controls the amount filled.
- The speed of the feed and dosing belts are variable control.
- Control Panel.
- Parts in contact with product and frame made of stainless steel AISI 304L/316 L.
- Belts made of food approved material.
OPTIONS
- Assembled on wheels
- Up to 4 dispensing belts
- Product elevator to hopper
- Allen Bradley PLC
DTT/LC.80 - Pocket Filler
This doser type DTT/LC-80.1 is a single row volumetric pocket filler intended for filling free flowing frozen diced vegetables, penne pasta, short pasta, rotini, meat and rice.
Request a QuoteFEATURES
- Product hopper positioned on the linear table complete with timed probes to maintain a min/max level of the product, so that constant fill is maintained while the pockets are filled.
- Table moves in and out over the filling station on the line.
- Product spreading paddle wheels controlled by a geared motor. Top and bottom plates with pockets. The adjustment of the volume is 90%. e.g.: 200 cc + 90% = 380 cc.
- Electromechanical and pneumatic cams to synchronize the movements.
- Proximity photocell to detect tray is on line to guarantee a no tray, no fill.
- Parts in contact with product and frame in stainless steel AISI 304/L.
- Filling capacity: 100 to 190 cc., 200 to 380 cc Speed: up to 18 cycles/min., (up to 70 fills per minute).
- Compressed air (clean & dry): without air assist – 50 NL/min.
OPTIONS
- Assembled on wheels
- Up to 8 pockets for increased output
- Product elevator
- Allen Bradley PLC
VS/BL - Doser / Filler
This doser is suitable for filling homogeneous products with particles up to .2" cubed. For example; tomato sauce, meat sauce, soup, juice, & syrup.
Request a QuoteFEATURES
- Filling body with 2 rotary lobes.
- Four gallon hopper, complete with level controls to maintain constant product level. (additional size hoppers available)
- Filling valve complete with a disc to open and close the discharge ports, a spring fitted on this disc ensures a perfect fit with the body of the valve.
- The movement is pneumatically controlled by a piston mounted on the valve itself. Due to the special design of the disc, product is not damaged during the filling phase and a no drip fill is ensured.
- Variable motor & lobe Speed.
- Stainless steel frame AISI 304 L.
- The hopper can also be double jacketed to maintain the temperature of a hot product. The hopper is heated by a heating element with thermal oil circulation, where a thermostat controls the temperature.
OPTIONS
- Moving head device to increase output
- Assembled on wheels
- Up to 4 dosing heads for multi-lane filling
- 52 gallon hopper
- Allen Bradley PLC
VF/SPM - Piston Filler
This doser type VF/SPM is suitable for dosing liquid and semi-liquid products containing solid pieces up to .5" cubed. For example: soups, stew, chili, meat sauce, tomato sauce, macaroni & cheese, mashed potatoes, ricotta & fillings.
Request a QuoteFEATURES
- Special dosing valve with pneumatic control to cut pieces of vegetables or meat which can stick in the valve, sealed to avoid dripping.
- Piston to adjust filling volume.
- Adjustable speed motor to increase or reduce the speed depending upon product consistency.
- Product hopper.
- Level control and product call probes.
- Auger to keep the product in suspension.
- No tray – no filling detector.
- Control panel.
- The hopper can also be double jacketed to maintain the temperature of a hot product.
- The hopper is heated by a heating element with thermal oil circulation, where a thermostat controls the temperature.
- Structure and all parts in contact with the product are stainless steel AISI 304/ L.
OPTIONS
- Moving head device for maximum output
- Assembled on wheels
- Up to 4 dosing heads per unit for multiple lane filling
- 52 gallon hopper
- Allen Bradley PLC
LA-3600E Automatic Label Applicator
The LA-3600E is a versatile label apply system for pre-printed promotional labels in high production industrial applications. Its versatile application options allows a wide range of shapes and sizes of labels to be applied accurately.
Request a QuoteBENEFITS
- The flexibility of the LA-3600E allows a wide range of labels of varying shapes and sizes to be used
- Provides a quick and straight forward setting up for different labels. Sliding guides and sensor adjustment means no tools are required
- Label positioning can be quickly and accurately set using the large multi-turn potentiometer
- An optional conveyor is available to allow the LA-3600E to be mounted over it for a complete in-line flash labelling solution
SPECIFICATIONS
Label size: min 36mm W, 40mm H., Max 120mm x 120mm (150mm long is possible with modification)
If using concave shoe, min 20mm H x 20mm W.Operating speed: up to 120 labels per min (using 60x40mm label)
Application system: Air box, Touch, Concave shoe.
Label roll:Â roll dia 300mm, core 76mm outside or inside wound
CW-700 Automatic Check Weigher
The CW-700 Automatic Check Weigher (with optional rejector) is a PC-based high speed dynamic weighing system. The flexibility of this machine with Windows® based architecture allows easy integration with existing systems.
Request a QuoteBENEFITS
The stainless steel tubular frame construction of this machine ensures a high quality, durable and strong structure. The CW has a large color touch screen which aids in easy programming, PLU selection and operation of the many 700 series features.
STANDARD SPECIFICATIONS
Pack Speed: up to 100ppm (up to 130ppm for Evo version)
Pack Size: L 80-300mm W 40-250mm
Capacity/Interval: 6kg/1g or greater, 12kg/2g or greater
MD-700 High Speed Metal Detector
Digi MD-700 High Speed Metal Detector Rejection System.The combination unit of metal detector and rejector offers a compact, all in one, stand-alone design.
Request a QuoteUsing photo electric sensors, the MD-700 is able to accurately reject products at a rate of up to 150ppm. Robust stainless steel construction, easy to operate and reliable.
BENEFITS:
- Stainless Steel Construction
The stainless steel tubular frame construction ensures a high quality, durable and strong structure. - Integrated Metal Detection Head
The metal detection head is fully integrated with the rejector providing easy setup. - Push Arm Rejection
The push arm type rejection offers a high speed, accurate and reliable method to reject a wide range of packs. - Intelligent Detection
To ensure pack rejection, the unit has advanced features such as reject confirmation, bin full and low air detection. Other features include on/off of metal detector, reset of rejector & reject confirmation check, all operated and protected by key lock. - Rejector Security
The rejector has an enclosed top guard with interlock and lockable bin. The high level warning light system ensures any visual alarm is seen. An audible alarm is also present.
SPECIFICATIONS:
Power: 220-240V AC 50Hz 105-115V AC 50Hz
Air: 58-87 lbs/sq. in., 50-300 ltrs/min
Pack Speed: Up to 150 ppm (dependent on pack size)
Pack Length: 80-200mm
Pack Width: 40-250mm
Pack Height: Up to 90mm
Metals: Ferrous, non-ferrous, stainless steel
IP Rating: Metal detector – IP69K (Nema 4X equivalent)
Construction: Stainless steel and anodized aluminum
Alarm: Audible and visual
Dimensions: Length – 1250mm; Width – 1100mm; Height – 1034mm
DPS 800 Manual Weigh Price Labeler
The DPS 800s Unit is a versatile, entry-level manual weigh / price / labeler which can be utilized in a wide variety of applications and settings.
Request a QuoteBENEFITS
The diversity of the DPS-800s allows it to be integrated into almost all environmental setting within the food production industry.
As a weigh/price/labeler, the DPS 800s can be used in catchweight, fixed weight and average weight modes and can also be utilized when selling retail. It can also be installed a s a manual checkweigher or labeling unit, or even as a simple monitoring terminal for data collection.
STANDARD SPECIFICATIONS
Power: 100-240V AC 50-60Hz
Capacity: 6kg/2g  10kg/5g  30kg/10g (compatible with all OML certified load cells)
Pack Size: Dependent on scale platform
Screen: 12.1 color high brightness TFT LCD
Touch Panel: Sealed resistive touch screen
Environment: -10 deg. C to +40 deg C
LI-700E Entry Auto Weigh/Price/Labeler
This is a single framed, modular design, entry level weigh/price/labeler.
Request a QuoteBENEFITS
- This labeler has an 80mm, 300dpi thermal head and air box applicator
- Available as a 2 or 3 conveyor machine
- Windows base architecture provides flexibility and integration with existing systems and networks
SPECIFICATIONS
Capacity: 6kg / e = 2g
Capacity: 10kg / e = 5g
Speed: Up to 45ppm max (stop to weigh)
Pack size, max: 300L x 250W
Print head: 80mm / 300dpi
Label size, max:Â 90W x105L (LC), 80W x 80L (cassette), 120W x150L (classic)
WI-700 Automatic Weigh/Price/Labeler
The DIGI WI-700 series is designed for wider products or carton boxes up to 70ppm. This machine is ideal for production lines needing a wider conveyor PC based option.
Request a QuoteBENEFITS
The DIGI WI-700 series uses an industrial PC system. The Windows® software offers a flexible integration for bi-directional communication in XML format to data collection, programming and line monitoring.
STANDARD SPECIFICATIONS
Print Head: 108mm & 80mm at 11.8 dots/mm – high speed labeler
Print Head: 80mm at 11.8 dots/mm – cassette labeler
Pack Size: L 80-300mm W 40-250mm
Capacity/Interval: 6kg/1g or greater, 12kg/2g or greater
MD-700 High Speed Metal Detector
Digi MD-700 High Speed Metal Detector Rejection System.The combination unit of metal detector and rejector offers a compact, all in one, stand-alone design.
Request a QuoteUsing photo electric sensors, the MD-700 is able to accurately reject products at a rate of up to 150ppm. Robust stainless steel construction, easy to operate and reliable.
BENEFITS:
- Stainless Steel Construction
The stainless steel tubular frame construction ensures a high quality, durable and strong structure. - Integrated Metal Detection Head
The metal detection head is fully integrated with the rejector providing easy setup. - Push Arm Rejection
The push arm type rejection offers a high speed, accurate and reliable method to reject a wide range of packs. - Intelligent Detection
To ensure pack rejection, the unit has advanced features such as reject confirmation, bin full and low air detection. Other features include on/off of metal detector, reset of rejector & reject confirmation check, all operated and protected by key lock. - Rejector Security
The rejector has an enclosed top guard with interlock and lockable bin. The high level warning light system ensures any visual alarm is seen. An audible alarm is also present.
SPECIFICATIONS:
Power: 220-240V AC 50Hz 105-115V AC 50Hz
Air: 58-87 lbs/sq. in., 50-300 ltrs/min
Pack Speed: Up to 150 ppm (dependent on pack size)
Pack Length: 80-200mm
Pack Width: 40-250mm
Pack Height: Up to 90mm
Metals: Ferrous, non-ferrous, stainless steel
IP Rating: Metal detector – IP69K (Nema 4X equivalent)
Construction: Stainless steel and anodized aluminum
Alarm: Audible and visual
Dimensions: Length – 1250mm; Width – 1100mm; Height – 1034mm
CW-700 Automatic Check Weigher
The CW-700 Automatic Check Weigher (with optional rejector) is a PC-based high speed dynamic weighing system. The flexibility of this machine with Windows® based architecture allows easy integration with existing systems.
Request a QuoteBENEFITS
The stainless steel tubular frame construction of this machine ensures a high quality, durable and strong structure. The CW has a large color touch screen which aids in easy programming, PLU selection and operation of the many 700 series features.
STANDARD SPECIFICATIONS
Pack Speed: up to 100ppm (up to 130ppm for Evo version)
Pack Size: L 80-300mm W 40-250mm
Capacity/Interval: 6kg/1g or greater, 12kg/2g or greater
LI-700E Entry Auto Weigh/Price/Labeler
This is a single framed, modular design, entry level weigh/price/labeler.
Request a QuoteBENEFITS
- This labeler has an 80mm, 300dpi thermal head and air box applicator
- Available as a 2 or 3 conveyor machine
- Windows base architecture provides flexibility and integration with existing systems and networks
SPECIFICATIONS
Capacity: 6kg / e = 2g
Capacity: 10kg / e = 5g
Speed: Up to 45ppm max (stop to weigh)
Pack size, max: 300L x 250W
Print head: 80mm / 300dpi
Label size, max:Â 90W x105L (LC), 80W x 80L (cassette), 120W x150L (classic)
WI-700 Automatic Weigh/Price/Labeler
The DIGI WI-700 series is designed for wider products or carton boxes up to 70ppm. This machine is ideal for production lines needing a wider conveyor PC based option.
Request a QuoteBENEFITS
The DIGI WI-700 series uses an industrial PC system. The Windows® software offers a flexible integration for bi-directional communication in XML format to data collection, programming and line monitoring.
STANDARD SPECIFICATIONS
Print Head: 108mm & 80mm at 11.8 dots/mm – high speed labeler
Print Head: 80mm at 11.8 dots/mm – cassette labeler
Pack Size: L 80-300mm W 40-250mm
Capacity/Interval: 6kg/1g or greater, 12kg/2g or greater
Accessories
To complement your filling needs, Harpak-ULMA offers both product elevators and screw feeders to keep your hoppers full and running efficiently. For your liquids, we offer both heated and standard storage tanks.
Request a QuoteCLA Screw Feeder
VSA Storage Tanks
This doser is suitable for filling bread crumbs, any type of granular products and shredded and diced cheese:Â cheddar, mozzarella, parmesan.
FEATURES
- Product hopper complete with level probes.
- Product spreading paddle wheels.
- Product feed belt controlled by a photocell to maintain a continuous flow to the leveling wheel.
- Leveling wheel to control the amount of product on the dosing belt.
- Dosing belt independently driven.
- A photocell detecting the tray actuates this belt and a timer on the control panel controls the amount filled.
- The speed of the feed and dosing belts are variable control.
- Control Panel.
- Parts in contact with product and frame made of stainless steel AISI 304L/316 L.
- Belts made of food approved material.
OPTIONS
- Assembled on wheels
- Up to 4 dispensing belts
- Product elevator to hopper
- Allen Bradley PLC
DTT/LC.80 - Pocket Filler
This doser type DTT/LC-80.1 is a single row volumetric pocket filler intended for filling free flowing frozen diced vegetables, penne pasta, short pasta, rotini, meat and rice.
Request a QuoteFEATURES
- Product hopper positioned on the linear table complete with timed probes to maintain a min/max level of the product, so that constant fill is maintained while the pockets are filled.
- Table moves in and out over the filling station on the line.
- Product spreading paddle wheels controlled by a geared motor. Top and bottom plates with pockets. The adjustment of the volume is 90%. e.g.: 200 cc + 90% = 380 cc.
- Electromechanical and pneumatic cams to synchronize the movements.
- Proximity photocell to detect tray is on line to guarantee a no tray, no fill.
- Parts in contact with product and frame in stainless steel AISI 304/L.
- Filling capacity: 100 to 190 cc., 200 to 380 cc Speed: up to 18 cycles/min., (up to 70 fills per minute).
- Compressed air (clean & dry): without air assist – 50 NL/min.
OPTIONS
- Assembled on wheels
- Up to 8 pockets for increased output
- Product elevator
- Allen Bradley PLC
VS/BL - Doser / Filler
This doser is suitable for filling homogeneous products with particles up to .2" cubed. For example; tomato sauce, meat sauce, soup, juice, & syrup.
Request a QuoteFEATURES
- Filling body with 2 rotary lobes.
- Four gallon hopper, complete with level controls to maintain constant product level. (additional size hoppers available)
- Filling valve complete with a disc to open and close the discharge ports, a spring fitted on this disc ensures a perfect fit with the body of the valve.
- The movement is pneumatically controlled by a piston mounted on the valve itself. Due to the special design of the disc, product is not damaged during the filling phase and a no drip fill is ensured.
- Variable motor & lobe Speed.
- Stainless steel frame AISI 304 L.
- The hopper can also be double jacketed to maintain the temperature of a hot product. The hopper is heated by a heating element with thermal oil circulation, where a thermostat controls the temperature.
OPTIONS
- Moving head device to increase output
- Assembled on wheels
- Up to 4 dosing heads for multi-lane filling
- 52 gallon hopper
- Allen Bradley PLC
VF/SPM - Piston Filler
This doser type VF/SPM is suitable for dosing liquid and semi-liquid products containing solid pieces up to .5" cubed. For example: soups, stew, chili, meat sauce, tomato sauce, macaroni & cheese, mashed potatoes, ricotta & fillings.
Request a QuoteFEATURES
- Special dosing valve with pneumatic control to cut pieces of vegetables or meat which can stick in the valve, sealed to avoid dripping.
- Piston to adjust filling volume.
- Adjustable speed motor to increase or reduce the speed depending upon product consistency.
- Product hopper.
- Level control and product call probes.
- Auger to keep the product in suspension.
- No tray – no filling detector.
- Control panel.
- The hopper can also be double jacketed to maintain the temperature of a hot product.
- The hopper is heated by a heating element with thermal oil circulation, where a thermostat controls the temperature.
- Structure and all parts in contact with the product are stainless steel AISI 304/ L.
OPTIONS
- Moving head device for maximum output
- Assembled on wheels
- Up to 4 dosing heads per unit for multiple lane filling
- 52 gallon hopper
- Allen Bradley PLC
LA-3600E Automatic Label Applicator
The LA-3600E is a versatile label apply system for pre-printed promotional labels in high production industrial applications. Its versatile application options allows a wide range of shapes and sizes of labels to be applied accurately.
Request a QuoteBENEFITS
- The flexibility of the LA-3600E allows a wide range of labels of varying shapes and sizes to be used
- Provides a quick and straight forward setting up for different labels. Sliding guides and sensor adjustment means no tools are required
- Label positioning can be quickly and accurately set using the large multi-turn potentiometer
- An optional conveyor is available to allow the LA-3600E to be mounted over it for a complete in-line flash labelling solution
SPECIFICATIONS
Label size: min 36mm W, 40mm H., Max 120mm x 120mm (150mm long is possible with modification)
If using concave shoe, min 20mm H x 20mm W.Operating speed: up to 120 labels per min (using 60x40mm label)
Application system: Air box, Touch, Concave shoe.
Label roll:Â roll dia 300mm, core 76mm outside or inside wound
CW-700 Automatic Check Weigher
The CW-700 Automatic Check Weigher (with optional rejector) is a PC-based high speed dynamic weighing system. The flexibility of this machine with Windows® based architecture allows easy integration with existing systems.
Request a QuoteBENEFITS
The stainless steel tubular frame construction of this machine ensures a high quality, durable and strong structure. The CW has a large color touch screen which aids in easy programming, PLU selection and operation of the many 700 series features.
STANDARD SPECIFICATIONS
Pack Speed: up to 100ppm (up to 130ppm for Evo version)
Pack Size: L 80-300mm W 40-250mm
Capacity/Interval: 6kg/1g or greater, 12kg/2g or greater
MD-700 High Speed Metal Detector
Digi MD-700 High Speed Metal Detector Rejection System.The combination unit of metal detector and rejector offers a compact, all in one, stand-alone design.
Request a QuoteUsing photo electric sensors, the MD-700 is able to accurately reject products at a rate of up to 150ppm. Robust stainless steel construction, easy to operate and reliable.
BENEFITS:
- Stainless Steel Construction
The stainless steel tubular frame construction ensures a high quality, durable and strong structure. - Integrated Metal Detection Head
The metal detection head is fully integrated with the rejector providing easy setup. - Push Arm Rejection
The push arm type rejection offers a high speed, accurate and reliable method to reject a wide range of packs. - Intelligent Detection
To ensure pack rejection, the unit has advanced features such as reject confirmation, bin full and low air detection. Other features include on/off of metal detector, reset of rejector & reject confirmation check, all operated and protected by key lock. - Rejector Security
The rejector has an enclosed top guard with interlock and lockable bin. The high level warning light system ensures any visual alarm is seen. An audible alarm is also present.
SPECIFICATIONS:
Power: 220-240V AC 50Hz 105-115V AC 50Hz
Air: 58-87 lbs/sq. in., 50-300 ltrs/min
Pack Speed: Up to 150 ppm (dependent on pack size)
Pack Length: 80-200mm
Pack Width: 40-250mm
Pack Height: Up to 90mm
Metals: Ferrous, non-ferrous, stainless steel
IP Rating: Metal detector – IP69K (Nema 4X equivalent)
Construction: Stainless steel and anodized aluminum
Alarm: Audible and visual
Dimensions: Length – 1250mm; Width – 1100mm; Height – 1034mm
DPS 800 Manual Weigh Price Labeler
The DPS 800s Unit is a versatile, entry-level manual weigh / price / labeler which can be utilized in a wide variety of applications and settings.
Request a QuoteBENEFITS
The diversity of the DPS-800s allows it to be integrated into almost all environmental setting within the food production industry.
As a weigh/price/labeler, the DPS 800s can be used in catchweight, fixed weight and average weight modes and can also be utilized when selling retail. It can also be installed a s a manual checkweigher or labeling unit, or even as a simple monitoring terminal for data collection.
STANDARD SPECIFICATIONS
Power: 100-240V AC 50-60Hz
Capacity: 6kg/2g  10kg/5g  30kg/10g (compatible with all OML certified load cells)
Pack Size: Dependent on scale platform
Screen: 12.1 color high brightness TFT LCD
Touch Panel: Sealed resistive touch screen
Environment: -10 deg. C to +40 deg C
LI-700E Entry Auto Weigh/Price/Labeler
This is a single framed, modular design, entry level weigh/price/labeler.
Request a QuoteBENEFITS
- This labeler has an 80mm, 300dpi thermal head and air box applicator
- Available as a 2 or 3 conveyor machine
- Windows base architecture provides flexibility and integration with existing systems and networks
SPECIFICATIONS
Capacity: 6kg / e = 2g
Capacity: 10kg / e = 5g
Speed: Up to 45ppm max (stop to weigh)
Pack size, max: 300L x 250W
Print head: 80mm / 300dpi
Label size, max:Â 90W x105L (LC), 80W x 80L (cassette), 120W x150L (classic)
WI-700 Automatic Weigh/Price/Labeler
The DIGI WI-700 series is designed for wider products or carton boxes up to 70ppm. This machine is ideal for production lines needing a wider conveyor PC based option.
Request a QuoteBENEFITS
The DIGI WI-700 series uses an industrial PC system. The Windows® software offers a flexible integration for bi-directional communication in XML format to data collection, programming and line monitoring.
STANDARD SPECIFICATIONS
Print Head: 108mm & 80mm at 11.8 dots/mm – high speed labeler
Print Head: 80mm at 11.8 dots/mm – cassette labeler
Pack Size: L 80-300mm W 40-250mm
Capacity/Interval: 6kg/1g or greater, 12kg/2g or greater
MD-700 High Speed Metal Detector
Digi MD-700 High Speed Metal Detector Rejection System.The combination unit of metal detector and rejector offers a compact, all in one, stand-alone design.
Request a QuoteUsing photo electric sensors, the MD-700 is able to accurately reject products at a rate of up to 150ppm. Robust stainless steel construction, easy to operate and reliable.
BENEFITS:
- Stainless Steel Construction
The stainless steel tubular frame construction ensures a high quality, durable and strong structure. - Integrated Metal Detection Head
The metal detection head is fully integrated with the rejector providing easy setup. - Push Arm Rejection
The push arm type rejection offers a high speed, accurate and reliable method to reject a wide range of packs. - Intelligent Detection
To ensure pack rejection, the unit has advanced features such as reject confirmation, bin full and low air detection. Other features include on/off of metal detector, reset of rejector & reject confirmation check, all operated and protected by key lock. - Rejector Security
The rejector has an enclosed top guard with interlock and lockable bin. The high level warning light system ensures any visual alarm is seen. An audible alarm is also present.
SPECIFICATIONS:
Power: 220-240V AC 50Hz 105-115V AC 50Hz
Air: 58-87 lbs/sq. in., 50-300 ltrs/min
Pack Speed: Up to 150 ppm (dependent on pack size)
Pack Length: 80-200mm
Pack Width: 40-250mm
Pack Height: Up to 90mm
Metals: Ferrous, non-ferrous, stainless steel
IP Rating: Metal detector – IP69K (Nema 4X equivalent)
Construction: Stainless steel and anodized aluminum
Alarm: Audible and visual
Dimensions: Length – 1250mm; Width – 1100mm; Height – 1034mm
CW-700 Automatic Check Weigher
The CW-700 Automatic Check Weigher (with optional rejector) is a PC-based high speed dynamic weighing system. The flexibility of this machine with Windows® based architecture allows easy integration with existing systems.
Request a QuoteBENEFITS
The stainless steel tubular frame construction of this machine ensures a high quality, durable and strong structure. The CW has a large color touch screen which aids in easy programming, PLU selection and operation of the many 700 series features.
STANDARD SPECIFICATIONS
Pack Speed: up to 100ppm (up to 130ppm for Evo version)
Pack Size: L 80-300mm W 40-250mm
Capacity/Interval: 6kg/1g or greater, 12kg/2g or greater
LI-700E Entry Auto Weigh/Price/Labeler
This is a single framed, modular design, entry level weigh/price/labeler.
Request a QuoteBENEFITS
- This labeler has an 80mm, 300dpi thermal head and air box applicator
- Available as a 2 or 3 conveyor machine
- Windows base architecture provides flexibility and integration with existing systems and networks
SPECIFICATIONS
Capacity: 6kg / e = 2g
Capacity: 10kg / e = 5g
Speed: Up to 45ppm max (stop to weigh)
Pack size, max: 300L x 250W
Print head: 80mm / 300dpi
Label size, max:Â 90W x105L (LC), 80W x 80L (cassette), 120W x150L (classic)
WI-700 Automatic Weigh/Price/Labeler
The DIGI WI-700 series is designed for wider products or carton boxes up to 70ppm. This machine is ideal for production lines needing a wider conveyor PC based option.
Request a QuoteBENEFITS
The DIGI WI-700 series uses an industrial PC system. The Windows® software offers a flexible integration for bi-directional communication in XML format to data collection, programming and line monitoring.
STANDARD SPECIFICATIONS
Print Head: 108mm & 80mm at 11.8 dots/mm – high speed labeler
Print Head: 80mm at 11.8 dots/mm – cassette labeler
Pack Size: L 80-300mm W 40-250mm
Capacity/Interval: 6kg/1g or greater, 12kg/2g or greater
Complete Filler & Doser Solutions ​
Filler machines and dosers are designed to fill various containers with measured amounts of materials in the initial stages of the packaging process. These substances can be liquid, solid, finished, unfinished, food-related, industrial, or commercial. Harpak-ULMA’s advanced lines of automatic and semi-automatic doser and filler machines incorporate the most advanced pneumatic technology, laser-guided detection elements, and easy-to-use controls to ensure perfect product consistency, price value, and ideal production process possible.
Regardless of the substance, our flexible filler machine solutions have the capabilities to meet your production needs according to your timetable and specific requirements. Our automatic and semi-automatic filler and doser options integrate today’s most innovative technology – photocell tray detection, electromechanical and pneumatic cams to synchronize movement, variable speed feeding, and dosing belts – to ensure the right temperature and level control for your product. Our solutions prepare product for weight, price, and labeling, and shipping processes downstream and give you more accurate production data over time.
Precision Label Application Solutions
Metal Detectors​
Metal detectors help to improve your product’s uniformity and quality. If there are defects, inconsistencies, or foreign agents that have infiltrated your primary or secondary packaging, these machines will both detect and reject flawed product to ensure safety and consumer satisfaction. At Harpak-ULMA, our automatic, high-speed metal detector/rejection systems offer the trusted reliability and ease of use you need, contained within an all-in-one system.
Government agencies, such as The Department of Agriculture Weights and Measures, apply strict regulations and industry standards on product packaging in the U.S. As a packager or processor, compliance with these standards is paramount. Violating them could mean penalties, production interruptions, and loss of revenue for your business. Industrial metal detectors can alleviate these concerns and play a pivotal role in your quality assurance.
Harpak-ULMA offers highly sensitive detection machinery that combines both metal detection and rejection equipment, all in one versatile unit. Highly attuned to the products within your supply chain, our detection machinery enables you to identify product issues quickly, avoid contamination for your entire packaging and production process, and achieve optimal technical performance to build an essential, effective inspection program.
Benefits of Metal Detectors
Intelligent Detection: This unit has advanced features such as reject confirmation, bin-full and low-air detection to ensure pack rejection. Other features include simple on/off toggling for metal detector, reset of rejector, and reject confirmation check – all operated and protected by key lock.
Â
Integrated Metal Detection Head: The metal detection head is fully integrated with the rejector, providing easy setup.Â
Â
Push Arm Rejection: The push-arm type rejection offers a high-speed, accurate, reliable method to reject a wide range of packs.Â
Â
Rejector Security: The rejector has an enclosed top guard with an interlocking and lockable bin. The high-level warning light system ensures any visual alarm is seen. An audible alarm is also present.
Â
Stainless Steel Construction: The stainless-steel tubular frame construction ensures a high-quality, durable, strong structure.
Why Integrate Metal Detection/
Rejection Equipment into Your Packaging Line?
In both food and non-food packaging, preserving your company’s reputation is everything. One investment in metal detector/rejector technology prevents safety recalls that could be hazardous to your customers’ health and the health of your business. Metal detection and defective product rejection are now an integral part of any modern packaging line. The relatively inexpensive cost of this equipment can go a long way in establishing trust for your brand and save you more over time.
Weigh/Price/Label Machines​
Advantages of Weigh, Price, Label Machines
Speed: WPL machinery gives you speeds of up to 120 Packs Per Minute (ppm), depending on the label dimensions.
Reduced Costs: WPL equipment integrates flawlessly with your existing production machinery and networks, saving you more on purchases, labor, reprogramming, and repairs.
Packaging Flexibility: Precise, repeatable label positioning for products becomes automatic with fast changeover and easy printer position adjustments.
Versatility & Efficiency: WPL machines can run different products simultaneously on one centralized device.