Increase your operational productivity and efficiency with advanced ancillary equipment
Contact Our Sales Team
Whether you are a small start-up looking for entry-level equipment, or a high-volume corporation operating at even higher production speeds,
we can be your single source supplier of high-end filling and marking solutions. We will work with you to conceive and design your customized machinery,
match your requirements and constraints, and deliver high-speed performance across an expansive range of packaging applications.
This doser is suitable for filling bread crumbs, any type of granular products and shredded and diced cheese:Â cheddar, mozzarella, parmesan.
FEATURES
- Product hopper complete with level probes.
- Product spreading paddle wheels.
- Product feed belt controlled by a photocell to maintain a continuous flow to the leveling wheel.
- Leveling wheel to control the amount of product on the dosing belt.
- Dosing belt independently driven.
- A photocell detecting the tray actuates this belt and a timer on the control panel controls the amount filled.
- The speed of the feed and dosing belts are variable control.
- Control Panel.
- Parts in contact with product and frame made of stainless steel AISI 304L/316 L.
- Belts made of food approved material.
OPTIONS
- Assembled on wheels
- Up to 4 dispensing belts
- Product elevator to hopper
- Allen Bradley PLC
DTT/LC.80 - Pocket Filler
This doser type DTT/LC-80.1 is a single row volumetric pocket filler intended for filling free flowing frozen diced vegetables, penne pasta, short pasta, rotini, meat and rice.
Request a QuoteFEATURES
- Product hopper positioned on the linear table complete with timed probes to maintain a min/max level of the product, so that constant fill is maintained while the pockets are filled.
- Table moves in and out over the filling station on the line.
- Product spreading paddle wheels controlled by a geared motor. Top and bottom plates with pockets. The adjustment of the volume is 90%. e.g.: 200 cc + 90% = 380 cc.
- Electromechanical and pneumatic cams to synchronize the movements.
- Proximity photocell to detect tray is on line to guarantee a no tray, no fill.
- Parts in contact with product and frame in stainless steel AISI 304/L.
- Filling capacity: 100 to 190 cc., 200 to 380 cc Speed: up to 18 cycles/min., (up to 70 fills per minute).
- Compressed air (clean & dry): without air assist – 50 NL/min.
OPTIONS
- Assembled on wheels
- Up to 8 pockets for increased output
- Product elevator
- Allen Bradley PLC
VS/BL - Doser / Filler
This doser is suitable for filling homogeneous products with particles up to .2" cubed. For example; tomato sauce, meat sauce, soup, juice, & syrup.
Request a QuoteFEATURES
- Filling body with 2 rotary lobes.
- Four gallon hopper, complete with level controls to maintain constant product level. (additional size hoppers available)
- Filling valve complete with a disc to open and close the discharge ports, a spring fitted on this disc ensures a perfect fit with the body of the valve.
- The movement is pneumatically controlled by a piston mounted on the valve itself. Due to the special design of the disc, product is not damaged during the filling phase and a no drip fill is ensured.
- Variable motor & lobe Speed.
- Stainless steel frame AISI 304 L.
- The hopper can also be double jacketed to maintain the temperature of a hot product. The hopper is heated by a heating element with thermal oil circulation, where a thermostat controls the temperature.
OPTIONS
- Moving head device to increase output
- Assembled on wheels
- Up to 4 dosing heads for multi-lane filling
- 52 gallon hopper
- Allen Bradley PLC
VF/SPM - Piston Filler
This doser type VF/SPM is suitable for dosing liquid and semi-liquid products containing solid pieces up to .5" cubed. For example: soups, stew, chili, meat sauce, tomato sauce, macaroni & cheese, mashed potatoes, ricotta & fillings.
Request a QuoteFEATURES
- Special dosing valve with pneumatic control to cut pieces of vegetables or meat which can stick in the valve, sealed to avoid dripping.
- Piston to adjust filling volume.
- Adjustable speed motor to increase or reduce the speed depending upon product consistency.
- Product hopper.
- Level control and product call probes.
- Auger to keep the product in suspension.
- No tray – no filling detector.
- Control panel.
- The hopper can also be double jacketed to maintain the temperature of a hot product.
- The hopper is heated by a heating element with thermal oil circulation, where a thermostat controls the temperature.
- Structure and all parts in contact with the product are stainless steel AISI 304/ L.
OPTIONS
- Moving head device for maximum output
- Assembled on wheels
- Up to 4 dosing heads per unit for multiple lane filling
- 52 gallon hopper
- Allen Bradley PLC
This doser is suitable for filling bread crumbs, any type of granular products and shredded and diced cheese:Â cheddar, mozzarella, parmesan.
FEATURES
- Product hopper complete with level probes.
- Product spreading paddle wheels.
- Product feed belt controlled by a photocell to maintain a continuous flow to the leveling wheel.
- Leveling wheel to control the amount of product on the dosing belt.
- Dosing belt independently driven.
- A photocell detecting the tray actuates this belt and a timer on the control panel controls the amount filled.
- The speed of the feed and dosing belts are variable control.
- Control Panel.
- Parts in contact with product and frame made of stainless steel AISI 304L/316 L.
- Belts made of food approved material.
OPTIONS
- Assembled on wheels
- Up to 4 dispensing belts
- Product elevator to hopper
- Allen Bradley PLC
DTT/LC.80 - Pocket Filler
This doser type DTT/LC-80.1 is a single row volumetric pocket filler intended for filling free flowing frozen diced vegetables, penne pasta, short pasta, rotini, meat and rice.
Request a QuoteFEATURES
- Product hopper positioned on the linear table complete with timed probes to maintain a min/max level of the product, so that constant fill is maintained while the pockets are filled.
- Table moves in and out over the filling station on the line.
- Product spreading paddle wheels controlled by a geared motor. Top and bottom plates with pockets. The adjustment of the volume is 90%. e.g.: 200 cc + 90% = 380 cc.
- Electromechanical and pneumatic cams to synchronize the movements.
- Proximity photocell to detect tray is on line to guarantee a no tray, no fill.
- Parts in contact with product and frame in stainless steel AISI 304/L.
- Filling capacity: 100 to 190 cc., 200 to 380 cc Speed: up to 18 cycles/min., (up to 70 fills per minute).
- Compressed air (clean & dry): without air assist – 50 NL/min.
OPTIONS
- Assembled on wheels
- Up to 8 pockets for increased output
- Product elevator
- Allen Bradley PLC
VS/BL - Doser / Filler
This doser is suitable for filling homogeneous products with particles up to .2" cubed. For example; tomato sauce, meat sauce, soup, juice, & syrup.
Request a QuoteFEATURES
- Filling body with 2 rotary lobes.
- Four gallon hopper, complete with level controls to maintain constant product level. (additional size hoppers available)
- Filling valve complete with a disc to open and close the discharge ports, a spring fitted on this disc ensures a perfect fit with the body of the valve.
- The movement is pneumatically controlled by a piston mounted on the valve itself. Due to the special design of the disc, product is not damaged during the filling phase and a no drip fill is ensured.
- Variable motor & lobe Speed.
- Stainless steel frame AISI 304 L.
- The hopper can also be double jacketed to maintain the temperature of a hot product. The hopper is heated by a heating element with thermal oil circulation, where a thermostat controls the temperature.
OPTIONS
- Moving head device to increase output
- Assembled on wheels
- Up to 4 dosing heads for multi-lane filling
- 52 gallon hopper
- Allen Bradley PLC
VF/SPM - Piston Filler
This doser type VF/SPM is suitable for dosing liquid and semi-liquid products containing solid pieces up to .5" cubed. For example: soups, stew, chili, meat sauce, tomato sauce, macaroni & cheese, mashed potatoes, ricotta & fillings.
Request a QuoteFEATURES
- Special dosing valve with pneumatic control to cut pieces of vegetables or meat which can stick in the valve, sealed to avoid dripping.
- Piston to adjust filling volume.
- Adjustable speed motor to increase or reduce the speed depending upon product consistency.
- Product hopper.
- Level control and product call probes.
- Auger to keep the product in suspension.
- No tray – no filling detector.
- Control panel.
- The hopper can also be double jacketed to maintain the temperature of a hot product.
- The hopper is heated by a heating element with thermal oil circulation, where a thermostat controls the temperature.
- Structure and all parts in contact with the product are stainless steel AISI 304/ L.
OPTIONS
- Moving head device for maximum output
- Assembled on wheels
- Up to 4 dosing heads per unit for multiple lane filling
- 52 gallon hopper
- Allen Bradley PLC
Complete Filler & Doser Solutions ​
Filler machines and dosers are designed to fill various containers with measured amounts of materials in the initial stages of the packaging process. These substances can be liquid, solid, finished, unfinished, food-related, industrial, or commercial. Harpak-ULMA’s advanced lines of automatic and semi-automatic doser and filler machines incorporate the most advanced pneumatic technology, laser-guided detection elements, and easy-to-use controls to ensure perfect product consistency, price value, and ideal production process possible.
Regardless of the substance, our flexible filler machine solutions have the capabilities to meet your production needs according to your timetable and specific requirements. Our automatic and semi-automatic filler and doser options integrate today’s most innovative technology – photocell tray detection, electromechanical and pneumatic cams to synchronize movement, variable speed feeding, and dosing belts – to ensure the right temperature and level control for your product. Our solutions prepare product for weight, price, and labeling, and shipping processes downstream and give you more accurate production data over time.
Precision Label Application Solutions
Metal Detectors​
Metal detectors help to improve your product’s uniformity and quality. If there are defects, inconsistencies, or foreign agents that have infiltrated your primary or secondary packaging, these machines will both detect and reject flawed product to ensure safety and consumer satisfaction. At Harpak-ULMA, our automatic, high-speed metal detector/rejection systems offer the trusted reliability and ease of use you need, contained within an all-in-one system.
Government agencies, such as The Department of Agriculture Weights and Measures, apply strict regulations and industry standards on product packaging in the U.S. As a packager or processor, compliance with these standards is paramount. Violating them could mean penalties, production interruptions, and loss of revenue for your business. Industrial metal detectors can alleviate these concerns and play a pivotal role in your quality assurance.
Harpak-ULMA offers highly sensitive detection machinery that combines both metal detection and rejection equipment, all in one versatile unit. Highly attuned to the products within your supply chain, our detection machinery enables you to identify product issues quickly, avoid contamination for your entire packaging and production process, and achieve optimal technical performance to build an essential, effective inspection program.
Benefits of Metal Detectors
Intelligent Detection: This unit has advanced features such as reject confirmation, bin-full and low-air detection to ensure pack rejection. Other features include simple on/off toggling for metal detector, reset of rejector, and reject confirmation check – all operated and protected by key lock.
Â
Integrated Metal Detection Head: The metal detection head is fully integrated with the rejector, providing easy setup.Â
Â
Push Arm Rejection: The push-arm type rejection offers a high-speed, accurate, reliable method to reject a wide range of packs.Â
Â
Rejector Security: The rejector has an enclosed top guard with an interlocking and lockable bin. The high-level warning light system ensures any visual alarm is seen. An audible alarm is also present.
Â
Stainless Steel Construction: The stainless-steel tubular frame construction ensures a high-quality, durable, strong structure.
Why Integrate Metal Detection/
Rejection Equipment into Your Packaging Line?
In both food and non-food packaging, preserving your company’s reputation is everything. One investment in metal detector/rejector technology prevents safety recalls that could be hazardous to your customers’ health and the health of your business. Metal detection and defective product rejection are now an integral part of any modern packaging line. The relatively inexpensive cost of this equipment can go a long way in establishing trust for your brand and save you more over time.
Weigh/Price/Label Machines​
Advantages of Weigh, Price, Label Machines
Speed: WPL machinery gives you speeds of up to 120 Packs Per Minute (ppm), depending on the label dimensions.
Reduced Costs: WPL equipment integrates flawlessly with your existing production machinery and networks, saving you more on purchases, labor, reprogramming, and repairs.
Packaging Flexibility: Precise, repeatable label positioning for products becomes automatic with fast changeover and easy printer position adjustments.
Versatility & Efficiency: WPL machines can run different products simultaneously on one centralized device.